Experiencing Bluetooth® issues with Go Direct® sensors on Chromebooks? Get help here.

O2 Gas Sensor

O2 Gas Sensor

O2 Gas Sensor

$210.00

The O2 Gas Sensor can be used to monitor gaseous oxygen levels in a variety of biology and chemistry experiments. The sensor is intended for measuring gaseous, not aqueous, O2 concentration.

ORDER CODE: O2-BTA Categories ,

The O2 Gas Sensor measures oxygen concentration in air, and is temperature compensated for use in different environments. It has a wide measurement range, allowing it to be used to study human and cellular respiration. The O2 Gas Sensor also includes a 250 mL bottle that can be used to study the rusting of iron or as a respiration chamber for monitoring plants and insects.

O2 Gas Sensor - Tech Tips with Vernier
O2 Gas Sensor - Tech Tips (5:30)
Vernier Lab - Cell Respiration (LabQuest)
Cell Respiration (LabQuest) (3:21)

Additional Videos

Vernier Lab - Cell Respiration (Computers)
Cell Respiration (Computer) (3:59)

Specifications

  • Measurement Range: 0–27% (0-270 ppt)
  • Accuracy (@ Standard Pressure 760 mm Hg): +/- 1% O2
  • Typical Resolution: 0.01%
  • Response Time: 90% of final reading in ~12 seconds
  • Warm-Up Time: Less than 5 seconds
  • Pressure Effect:

    • Directly proportional
    • Vout = Vout (standard) x (P/1013)
    • Pressure range: 0.5 atm to 1.5 atm
  • Output Signal Range: 0.3 to 5 VDC; 2.7 to 3.8 VDC @ 21% O2
  • Output Impedance: 1 KΩ
  • Input Voltage: 5 VDC +/–0.25 VDC
  • Gas Sampling Mode: Diffusion
  • Normal Operating Temperature Range: 20°C to 30°C
  • Operating Temperature Range: 5 to 40°C (with calibration)
  • Operating Humidity Range: 0 to 95% RH
  • Storage Temperature Range: –20 to +60°C
  • Dimensions:

    • Sensor Tube: 45 mm length, 28 mm OD
    • Total length: 135 mm

Experiments

High School (20 experiments)
College (20 experiments)

Requirements

Choose a platform below to see its compatibility requirements. This sensor requires an interface (sold separately).

LabQuest
InterfaceLabQuest App
LabQuest 3Full support
LabQuest 2 (discontinued)Full support
LabQuest (discontinued)Full support
Computers
Software
InterfaceGraphical AnalysisLogger ProLogger Lite
LabQuest MiniFull supportFull supportFull support
LabQuest 3Full supportFull supportIncompatible
LabQuest 2 (discontinued)Full supportFull supportFull support
LabQuest Stream (discontinued)Full support 1Full supportFull support 1
Go!LinkFull supportFull supportFull support
LabQuest (discontinued)Full supportFull supportFull support
LabPro (discontinued)IncompatibleFull supportFull support

Compatibility Notes

  1. Connect LabQuest Stream via USB. Wireless connection is not supported.
Chromebook
Software
InterfaceGraphical Analysis
LabQuest MiniFull support
LabQuest 3Full support
LabQuest 2 (discontinued)Full support
LabQuest Stream (discontinued)Full support 1
Go!LinkFull support
LabQuest (discontinued)Full support

Compatibility Notes

  1. Connect LabQuest Stream via USB. Wireless connection is not supported.
iOS
Software
InterfaceGraphical AnalysisGraphical Analysis GW
LabQuest Stream (discontinued)Full supportFull support
LabQuest 3Full support 1Full support 1
LabQuest 2 (discontinued)Full support 1Full support 1

Compatibility Notes

  1. iOS and Androidâ„¢ devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing.
Android
Software
InterfaceGraphical AnalysisGraphical Analysis GW
LabQuest Stream (discontinued)Full supportPartial support 1
LabQuest 3Full support 2Full support 2
LabQuest 2 (discontinued)Full support 2Full support 2

Compatibility Notes

  1. Data can be collected using the sensor’s default calibration only.
  2. iOS and Androidâ„¢ devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing.
Arduino
Software
InterfaceArduino
Vernier Arduino® Interface ShieldFull support
LabVIEW
Software
InterfaceNI LabVIEW
SensorDAQ (discontinued)Full support
Vernier myDAQ AdapterFull support 1
Go!LinkFull support
LabQuest MiniFull support
LabQuest Stream (discontinued)Full support
LabQuest 3Full support
LabQuest 2 (discontinued)Full support
LabQuest (discontinued)Full support

Compatibility Notes

  1. You can only read the raw count/raw voltage output by this sensor. You must do the programming to convert to proper sensor units.
Texas Instruments
Software
InterfaceEasyDataDataMateTI-84 SmartViewDataQuestTI-Nspire Software
EasyLinkFull support 1IncompatibleFull support 2Full supportFull support 2
CBL 2 (discontinued)Full support 3Full support 3 4IncompatibleIncompatibleIncompatible
LabPro (discontinued)Full support 3Full support 3 4IncompatibleIncompatibleIncompatible
TI-Nspire Lab Cradle (discontinued)IncompatibleIncompatibleIncompatibleFull supportFull support

Compatibility Notes

  1. Use with TI-84 Plus calculators only.
  2. Requires an Easy to Go! adapter
  3. CBL 2 and LabPro interfaces cannot be used with TI-84 Plus CE calculators.
  4. DataMate cannot be used with color screen TI-84 Plus calculators; use EasyData with these calculators.

What's Included

  • Vernier O2 Gas Sensor
  • 250 mL gas sampling bottle

Accessories

AccessoryOrder CodePriceQuantity
BioChamber 2000BC-2000$22.00
BioChamber 250BC-250$9.00
250 mL Nalgene Bottle w/LidCO2-BTL$5.00
O2 Gas Sensor to Spirometer AdapterO2-SPR$8.00

Support

Educational use only: Vernier products are designed for educational use. They are not appropriate for industrial, medical, or commercial applications.

SAVE/SHARE YOUR CART