Go Wireless^® Link (GW-LINK, discontinued)
Specifications and User Guide

TROUBLESHOOTING
Primary Test: Press the power button on the Go Wireless Link to turn it on (the red LED will start flashing). Start the data-collection app and select the interface from the list of available interfaces (the green LED will start flashing). Connect an auto-ID sensor.

HARDWARE REQUIREMENTS
Go Wireless Link uses Bluetooth low energy technology and can only be used with devices that support Bluetooth low energy technology running the appropriate software.

Requirements for iOS support
Hardware
– iPad (3rd generation or later)
– iPad air
– iPad mini (all models)
– iPhone (4S or later)
– iPod touch (5th generation)
Software
– Graphical Analysis for iOS (v2.3 – 4.0.3)
– Graphical Analysis GW for iOS

Requirements for Android support
Hardware
– For Android devices that support Bluetooth low energy technology, see: https://www.bluetooth.com/what-is-bluetooth-technology/bluetooth-devices
Software
– Graphical Analysis for Android v2.2 – 3.1
– Graphical Analysis GW for Android

Requirements for LabQuest 2 support
Hardware
– Model:LQ2-LE
– Model:LABQUEST2, requires an external Bluetooth radio, Go Direct® Bluetooth® Adapter (GDX-RADIO)
to know which model LabQuest you have, see How do I know if my LabQuest will work with Go Direct Sensors and Go Wireless devices?
Software
– LabQuest App v2.6 or higher

Requirements for LabQuest 3 support
Hardware
– LabQuest 3 – All models
Software
– LabQuest App – All versions

It is NOT COMPATIBLE with:
– Chromebooks or computers
– Graphical Analysis App
– Graphical Analysis Pro
– Logger Pro

RELATED ARTICLES
Go Wireless Sensors - Computer, Tablet and Mobile Device Support Details
Go Wireless Sensors - LabQuest Support Details
Go Wireless sensors - battery details
How do I change the name of my Go Wireless sensor?
Where do I find the serial number and hardware/firmware version numbers of my Go Wireless sensor?
What do the different LED states mean on a Go Wireless Sensor?
What does the button do on Go Wireless sensors?
Why is my Go Wireless sensor not communicating with my Android tablet even though the LED is flashing green?
Do Go Wireless products work with computers?
What sensors are supported by Go Wireless Link when using Graphical Analysis GW for iOS?
My Go Wireless Link thinks that the wrong sensor is connected.
How do I tell multiple Go Wireless devices apart?
How do I remove or replace a Go Wireless Link battery?
ISEs connected to a Go Wireless Link are identified as a different sensor.
Is it OK to use Go Wireless or Go Direct sensors in a vacuum?

SPECIFICATIONS
– Resolution: 15 bit
– Temperature range of the interface: -10 to 45°C
– Maximum wireless range: ~30 m, unobstructed in air (results will vary)
Note the Go Wireless Link is not waterproof, do not immerse the interface in water.

Interface dimensions
– length 8.0 cm, maximum width 3.2 cm, minimum width 2.2 cm

REPLACEMENT PARTS
– Go Wireless^® Charging Cable (GW-CB)
– Go Wireless® 250 mAh Replacement Battery (GW-BAT-250)

RELATED VERNIER PRODUCTS
– Go Direct^® Charge Station (GDX-CRG)