Graphical Analysis GW and Graphical Analysis app (version 2.3.1 – 4.0.3) for iOS supports data collection with the Go Wireless Link sensor interface when used with the following sensors:
30-Volt Voltage Probe (30V-BTA)
3-Axis Accelerometer (3D-BTA) -only one axis at a time (not two or three simultaneously)
25-g Accelerometer (ACC-BTA)
Anemometer (ANM-BTA)
Barometer (BAR-BTA)
Calcium Ion-Selective Electrode (CA-BTA)
Constant Current System (CCS-BTA)
Chloride Ion-Selective Electrode (CL-BTA)
CO2 Gas Sensor (CO2-BTA)
Colorimeter (COL-BTA)
Conductivity Probe (CON-BTA)
Platinum-Cell Conductivity Probe (CONPT-BTA)
Charge Sensor (CRG-BTA)
Current Probe (DCP-BTA)
Dual-Range Force Sensor (DFS-BTA) -Maximum data rate may limit the sensor’s response in collision experiments.
Dissolved Oxygen Probe (DO-BTA)
Differential Voltage Probe (DVP-BTA)
Vernier Optical DO Probe (ODO-BTA)
Electrode Amplifier (EA-BTA) – data collection in mV only; pH calibration is not supported
Ethanol Sensor (ETH-BTA)
Flow Rate Sensor (FLO-BTA)
Force Plate (FP-BTA)
Goniometer (GNM-BTA)
Gas Pressure Sensor (GPS-BTA)
High Current Sensor (HCS-BTA)
Hand Dynamometer (HD-BTA)
Instrumentation Amplifier (INA-BTA)
Infrared Thermometer (IRT-BTA, discontinued)
Potassium Ion-Selective Electrode (K-BTA)
Low-g Accelerometer (LGA-BTA)
Light Sensor (LS-BTA)
Magnetic Field Sensor (MG-BTA)
(MELT-BTA, discontinued)
Ammonium Ion-Selective Electrode (NH4-BTA)
O2 Gas Sensor (O2-BTA)
Vernier Optical DO Probe (ODO-BTA)
ORP Sensor (ORP-BTA)
Power Amplifier (PAMP) -for monitoring the internal current of the Power Amplifier only
PAR Sensor (PAR-BTA)
pH Sensor (PH-BTA)
Pressure Sensor 400 (PS400-BTA)
Pyranometer (PYR-BTA)
Relative Humidity Sensor (RH-BTA)
Salinity Sensor (SAL-BTA)
Sound Level Meter (SLM-BTA, discontinued)
Sound Level Sensor (SLS-BTA)
Soil Moisture Sensor (SMS-BTA)
Surface Temperature Sensor (STS-BTA)
Thermocouple (TCA-BTA)
Extra-Long Temperature Probe (TPL-BTA)
TI Light Probe (TILT-BTA, discontinued)
Stainless Steel Temperature Probe (TMP-BTA)
Turbidity Sensor (TRB-BTA)
UVA Sensor (UVA-BTA)
UVB Sensor (UVB-BTA)
Vernier Energy Sensor (VES-BTA) -Either Current sensor or Voltage sensor (not both simultaneously)
Voltage Probe (VP-BTA)
Vernier Structures & Materials Tester (VSMT) -Force sensor only, linear displacement sensor is not supported