Troubleshooting
- Primary Test: See if the sensor is automatically recognized by the software
- Secondary Test: Apply a voltage across the leads and see if the reading changes.
Additional Troubleshooting
- Why are the leads on 30V-BTA so unusual?
- What is the accuracy of the 30-Volt Voltage Probe?
- Why are the readings from the 30V probe lower than expected?
Specifications
- Input Impedance: 30 kΩ
- Output voltage range: ±10 V
- Voltage range: ±30 V
- Typical Resolution: 15Â mV
Calibration
Calibrate? No calibration is required for this sensor.
Related Products
- High Current Sensor (
HCS-BTA ) - Differential Voltage Probe (
DVP-BTA ) - Voltage Probe (
VP-BTA ) - Go Direct® Voltage Probe (
GDX-VOLT )