Search
Water Depth Sampler- Extra-Long Temperature Probe Troubleshooting and FAQs
- Aug 31, 2016 ... For more information on calibration, see How do I calibrate my sensor? Related Products. Water Depth Sampler (WDS); Stainless Steel ...
- https://www.vernier.com/til/3742
- What materials are used to manufacture the Water Depth Sampler?
- The Water Depth Sampler is used to collect water samples at different depths in a body of water. The sampler is made of a PVC...
- https://www.vernier.com/til/14336/
- Which Vernier sensors are submersible in water?
- Most Vernier sensors are not meant to be completely submerged in water. In general, sensors that measure some parameter of water, e.g., pH, conductivity, or...
- https://www.vernier.com/til/4432/
- Can I use Vernier water quality sensors in salt water or in a salt water aquarium?
- It depends on the sensor. The following is a list of the common Water Quality sensors and their resistance to salt water. Temperature Probe –...
- https://www.vernier.com/til/1399/
- What are the specifications for the KidWind water pump?
- The KidWind video on the reports the minimum voltage as 1.7 volts and 50 mA. We have operated the pump at up to 5 volts....
- https://www.vernier.com/til/3172/
- Which generator should I use to pump water?
- Of the generators that come with the KidWind Advanced Wind Experiment Kit, the smaller generator (less than 1 inch diameter, labeled “High Torque Generator”) is...
- https://www.vernier.com/til/3130/
- My LabQuest unit got very wet, and now it won't turn on. What can I do?
- LabQuest is designed to be splash-resistant, but is not waterproof. If the unit is immersed or gets very wet, permanent damage can result. Such damage...
- https://www.vernier.com/til/2425/
- Can I place the CO₂ sensor into a water sample? Does your CO₂ sensor measure dissolved CO₂? Do you have a dissolved CO₂ sensor?
- The CO₂ Gas Sensor is a Gas sensor. You will ruin the sensor if it is placed in water or other solutions. Do not place...
- https://www.vernier.com/til/2567/
- Can I inject water into Vernier gas chromatographs?
- No, you CANNOT inject water into any version of the Mini GC (Mini GC, Mini GC Plus, or Go Direct Mini GC). Injecting any sample...
- https://www.vernier.com/til/2900/
- Can I submerge the Vernier Microphone in order to measure the speed of sound in water?
- We do not recommend submerging the microphone in water. It is not intended for that use. We do not at this time sell a sensor...
- https://www.vernier.com/til/3120/
- Can I use multiple water quality sensors in the same solution via Bluetooth without interference?
- Yes, in our testing we have not found any combination of the Go Direct water quality sensors that interfere with each other when connected via...
- https://www.vernier.com/til/3890/
SAVE/SHARE YOUR CART