Search
USB A to B Cable- How do I use Vernier USB products with a computer or Chromebook ...
- Jun 14, 2019 ... Computers and Chromebooks with only USB-C ports will require either an adapter or a native USB-C cable to use Vernier USB products.
- https://www.vernier.com/til/3822
- How do I connect LabQuest to a printer?
- Mar 23, 2016 ... USB: You will need to use a standard USB-A to USB-B connector. This is the same cable used to connect USB printers to a computer. It is also ...
- https://www.vernier.com/til/1797
- Can I use Go! devices with TI-84 Plus or TI-Nspire calculators or ...
- Motion to a calculator. This 72 inch cable has a standard USB-B connector on one end and a USB Mini-A connector on the other end. (Included with CBR ...
- https://www.vernier.com/til/1469
- Why does my palmOne Tungsten E2 not HotSync after collecting data?
- Jun 30, 2007 ... ... USB HotSync cable. a. Tap and hold the Cancel button until it changes color. b. Unplug the HotSync cable and wait for a low beep. c. Plug in ...
- https://www.vernier.com/til/1395
- How is the Go Direct SpectroVis Plus Spectrophotometer different ...
- Mar 20, 2017 ... 5. The GDX-SVISPL has a mini USB connection whereas the previous versions had a standard B USB connection. It comes with the necessary USB cable ...
- https://www.vernier.com/til/3919
- What is needed to use Go Direct sensors with the TI-Nspire ...
- May 28, 2024 ... The data-only sensor cable has a mini-A USB connector (for connecting to a TI-Nspire handheld) and a micro-B USB connector (for connecting to ...
- https://www.vernier.com/til/20536
- Why does my TI-Nspire calculator battery quickly drain when using ...
- Jun 5, 2024 ... Before using the sensor, be sure it is fully charged. To charge a Go Direct sensor, use the USB cable included with each sensor. Sensors can be ...
- https://www.vernier.com/til/20862
- What is “Live” mode in mBlock 5? Why would I use it?
- Sep 11, 2019 ... Typically, students use mBot mBot (Blue) and STEM Activities Module (MBOT-B ... In this programming mode, mBlock is connected to mBot via USB ...
- https://www.vernier.com/til/4141
- Should I buy EasyTemp, Go!Temp, or Go Direct Temp to work with ...
- Temp cable has a standard USB-A plug for connecting to a computer or Chromebook. The Go! to Easy USB adapter converts the USB-A plug on the Go!Temp into a mini ...
- https://www.vernier.com/til/4364
- What is different when using the DataQuest App with Go Direct ...
- Jun 4, 2024 ... connected via USB, connected via Bluetooth. Required for connection to the calculator, Data-Only Go Direct USB Cable, TI Bluetooth Adapter.
- https://www.vernier.com/til/20821
- How should I wrap my sensor cable?
- Some of our sensors include a cable or cord, and it is tempting to wrap it around the sensor for storage. In a short time,...
- https://www.vernier.com/til/2377/
- What is the ideal way to prepare a USB thumb drive for updating original LabQuest?
- This information pertains to the original LabQuest. If you have LabQuest 2, see this article. To prepare a USB thumb drive for updating LabQuest, do...
- https://www.vernier.com/til/2493/
- Why is it that some micro USB cables do not work with my Go Direct sensors?
- Some micro USB cables are made only for charging devices and are not wired for communication. These are often included in electronic devices that are...
- https://www.vernier.com/til/4094/
- Can I use a longer cable, either serial or USB, to extend the distance between my interface and the computer?
- It is possible to purchase or build longer cables. We suggest the following parameters for cable length. USB – The maximum cable length that we...
- https://www.vernier.com/til/711/
- OHAUS Balance Troubleshooting
- OHAUS Troubleshooting Connect an OHAUS balance using the appropriate USB cable. Launch the software and choose New from the File menu. The balance should be...
- https://www.vernier.com/til/3888/
- Should I buy EasyLink or Go!Link to work with Texas Instruments calculators, computers, and Chromebooks?
- If you need a sensor interface that works with Texas Instruments calculators as well as computers and Chromebooks, we recommend you purchase the following: The...
- https://www.vernier.com/til/4363/
- Why doesn't my Vernier Photogate (VPG-BTD) auto-ID?
- This photogate supports auto-ID The Vernier Photogate (shipped since mid-June 2003) has the necessary technology for auto-ID. It can most easily be identified by the...
- https://www.vernier.com/til/1279/
SAVE/SHARE YOUR CART