Search
Replacement Melt Station Power Supply- Melt Station Troubleshooting and FAQs – Technical Information ...
- Aug 22, 2017 ... Troubleshooting. Primary Test: Power the Melt Station using its AC adapter. Connect the Melt Station's BTA plug to a data collection ...
- https://www.vernier.com/til/2321
- Go Direct Melt Station Troubleshooting and FAQs – Technical ...
- Aug 22, 2017 ... Plug in the Melt Station using its AC adapter. · Turn the control dial to any temperature setting, including Rapid Heat. · Connect your sensor as ...
- https://www.vernier.com/til/3852
- How do I remove a broken capillary tube from a Melt Station ...
- May 23, 2017 ... Wear safety glasses or safety goggles. 1. Turn off the Melt Station and allow it to cool to room temperature. Unplug the power cord from the ...
- https://www.vernier.com/til/3899
- Go Direct Projectile Launcher Troubleshooting and FAQs ...
- Dec 13, 2018 ... Power: USB power source (USB port, USB wall outlet, or USB power brick) ... Melt Station (MLT-BTA); Time of Flight Pad (TOF-VPL); Projectile Stop ...
- https://www.vernier.com/til/4196
- Why is Logger Pro not connecting to the interface and reading “No ...
- Sep 20, 2017 ... ... power supplies, and computers to see if the problem is with a piece of the hardware or with the computer. The best test to do is to take one ...
- https://www.vernier.com/til/740
- The control knob on my Melt Station is loose. How can I tighten it?
- The control knob on the Melt Station is held in place with two set screws. The drive size of the set screws is 1.5 mm....
- https://www.vernier.com/til/3277/
- How do you use the current and voltage controls of the Extech Power supply?
- The can operate in either voltage-control or current-control modes, and so has both current and voltage control knobs. Most instructors are familiar with power supplies...
- https://www.vernier.com/til/1825/
- Davis Instruments Troubleshooting and FAQs
- As of January 2025 Vernier Science Education no longer sells Davis Instruments products. For help with Davis Instrument products see below: Davis Support Web Page:...
- https://www.vernier.com/til/2515/
- How can I check to see if my Power Amplifier power supply is working?
- The power supply for the Power Amplifier is an unusual double power supply. If you look at the connector which plugs into the Power Amplifier,...
- https://www.vernier.com/til/3938/
- Can I autoclave the bottle that comes with my CO2 or O2 sensor?
- We do not recommend autoclaving the 250 mL Nalgene bottles , , that ship with the O2 and CO2 gas sensors. We also do not...
- https://www.vernier.com/til/4339/
- Can I use a dishwasher to wash the Nalgene bottle that shipped with my O2 or CO2 Gas Sensor?
- It is recommended that you wash the Nalgene bottles by hand. This includes and the . The bottles are made of Polyethylene terephthalate G copolymer...
- https://www.vernier.com/til/2318/
- What power supplies can I use with the DCU?
- On the back side of newer DCUs (Digital Control Units) are two different sockets to accept a DC power supply: 1) The smaller socket is...
- https://www.vernier.com/til/3236/
SAVE/SHARE YOUR CART