Search - Vernier

$Red Diffraction Laser$ Red Diffraction Laser

- Diffraction Apparatus Troubleshooting and FAQs – Technical ...
- Specifications · Diffraction Apparatus Sensors ⚬ Light Sensor Full Scale Ranges: 1, 10, and 100 µW ⚬ Linear Position Sensor range: 150 mm · Red Laser (included ...
- https://www.vernier.com/til/2995
- What is the tolerance on the slits and lasers of the Diffraction ...
- The Diffraction Apparatus (DAK) includes a set of slits and a red laser. The slit dimensions and laser wavelengths are critical dimensions for comparing ...
- https://www.vernier.com/til/2947
- Can you trigger a photogate with a green laser?
- Yes. We have tested this with the and it effectively activates the photogate’s photo-transistor. A Class 2 laser is generally considered safe as the blink...
- https://www.vernier.com/til/4135/
- Does the Pasco Laser Switch (ME-9259A) work with Vernier interfaces?
- Yes. If you use the , the ME-9259A will work with LabPro.
- https://www.vernier.com/til/1980/
- Optics Expansion Kit Troubleshooting and FAQs
- Specifications and User Guide Center thickness of the three lenses included in the Optics Expansion Kit: 10 cm convex – 8.3mm 20 cm convex –...
- https://www.vernier.com/til/2948/
- Why does my Vernier Photogate (VPG-BTD) not respond to block/unblock events?
- Check the position of the sliding shutter on the inside of the photogate. Since the shutter is black, it is easy to miss its position....
- https://www.vernier.com/til/1360/
- The KidWind Mini Turbine does not light the red LED or work with the sound and light board.
- This article specifically refers to the use of the and with the . If you suspect your generator does not work and you are not...
- https://www.vernier.com/til/3223/
- How do I repair a KidWind Mini Wind Turbine nacelle that is incorrectly wired?
- If you have confirmed that your KidWind Mini Wind Turbine is incorrectly wired inside the nacelle, and you wish to repair it yourself, this is...
- https://www.vernier.com/til/3224/
- Can the Vernier Arduino Interface Shield be used with 3-volt Arduinos?
- 3-volt Arduinos are a poor choice when using to connect Vernier LabQuest sensors to an Arduino microcontroller. LabQuest sensors require a 5.0 volt power supply....
- https://www.vernier.com/til/3233/
- What is the wavelength of the Green Diffraction Laser?
- If the was purchased before August 2024, the green laser has a wavelength of 532 nm. Any green laser purchased from Vernier Science Education after...
- https://www.vernier.com/til/17785/