Search
Optical DO Storage Bottle Cap- How do I reset the calibration on the Optical DO Probe? – Technical ...
- Dec 3, 2015 ... Calibration Reset Instructions. Position the switch to %. Add distilled water to the storage bottle to the top of the sponge. Insert the probe ...
- https://www.vernier.com/til/3345
- Optical DO Probe Troubleshooting and FAQs – Technical ...
- Dec 19, 2019 ... The Optical DO Probe and sensor cap are factory calibrated and a calibration code specific to each individual cap is determined during the ...
- https://www.vernier.com/til/2988
- How do I replace a cap on the Go Direct Optical Dissolved Oxygen ...
- Put the probe in a beaker of distilled water for at least one hour. Put distilled water in the ODO storage bottle so that it covers the sponge at the bottom. (Â ...
- https://www.vernier.com/til/4434
- Go Direct Optical Dissolved Oxygen Probe Troubleshooting and FAQs
- Nov 11, 2019 ... Replacement Parts. Go Direct Optical Dissolved Oxygen Replacement Cap (GDX-ODO-CAP); Electrode Storage Bottles (BTL-ES). Related Links. Optical ...
- https://www.vernier.com/til/4227
- How should I store Vernier products during the summer ...
- May 15, 2018 ... ... cap. Optical DO Probes: The humid environment of the storage bottles in which Optical DO Probes are shipped is ideal for long-term storage.
- https://www.vernier.com/til/3686
- How do I manually calibrate my sensor in LabQuest App ...
- Feb 3, 2016 ... For example, if you are calibrating a pH Sensor, remove the storage bottle from the electrode (if applicable), rinse the tip of the sensor ...
- https://www.vernier.com/til/3394
- O2 Gas Sensor Troubleshooting and FAQs – Technical Information ...
- Jun 9, 2016 ... Failure to store upright will reduce the life of the sensor. Is your data-collection period too short? Diffusion of gases is a fairly slow ...
- https://www.vernier.com/til/1421
- What do I do if my Optical DO storage cap is broken?
- A crack at the end of the clear storage cap (where the sponge is located) does not affect the functionality of the Vernier Optical DO...
- https://www.vernier.com/til/3094/
- When does the Optical DO Probe cap need to be replaced?
- All optical dissolved oxygen probes work on the same principle and all must have the sensing cap containing the luminophore replaced periodically due to a...
- https://www.vernier.com/til/2997/
- What is the difference between the white storage bottle in the Optical DO Probe video and the clear bottle I received?
- The clear storage bottle containing the damp yellow sponge provides better protection for the probe during storage. Remove the entire bottle to use the Optical...
- https://www.vernier.com/til/3064/
- How can I keep my pH or ORP storage solution from spilling when the sensor is in use?
- After removing the sensor but before screwing the cap back on the storage solution bottle, place a nickel under the cap and screw the cap...
- https://www.vernier.com/til/728/
- Which optical fiber cable is used with which spectrometer?
- A summary all the fiber optic cables and the spectrometers with which they can be used is found at https://www.vernier.com/til/6290.
- https://www.vernier.com/til/3927/
- I bought your pH buffer capsules. Can I make storage solution for my pH Sensors with this kit?
- The (formerly order code PHB) contains two of the three items you’ll need to prepare the electrode storage solution for our pH Sensors. To prepare...
- https://www.vernier.com/til/2174/
SAVE/SHARE YOUR CART