Did you mean "Nose Clip for Spirometer"

1. • How effective is the bacterial filter for the spirometer?
   • –Disposable Mouthpieces for Spirometer (SPR-MP30) (pkg. of 30) –Noseclips for Spirometer (SPR-NOSE10) (pkg. of 10) –Spirometer Flow Head (SPR-FLOW).
   • https://www.vernier.com/til/1532
2. • Spirometer Troubleshooting and FAQs
   • Mar 9, 2016 ... Connect the Spirometer to a Vernier interface (e.g., LabQuest, LabQuest Mini, or Go!Link). Launch the Data Collection software. Hold the sensor ...
   • https://www.vernier.com/til/1409
3. • Go Direct Spirometer Troubleshooting and FAQs
   • Click or tap “Collect” to start data collection. Collect data for inhalation and exhalation. Confirm that the flow rate and lung volumes are reasonable. Tidal ...
   • https://www.vernier.com/til/4455
4. • Can I sterilize the flow head of the Spirometer?
   • Aug 7, 2019 ... You should always use any Spirometer with a mouthpiece and bacterial filter. The nose clips should be wiped clean between uses and soaked in ...
   • https://www.vernier.com/til/4463
5. • Do I need to use a bacterial filter with the spirometer, and how many times can I use the same filter?
   • This information pertains to both the Spirometer and the Go Direct Spirometer. For safety precautions, a bacterial filter must always be used with the spirometer,...
   • https://www.vernier.com/til/2230/
6. • Can I perform a custom calibration of a Vernier Spirometer?
   • It is not possible to use our software to perform a typical custom calibration on any of our spirometers. But you can adjust the calibration...
   • https://www.vernier.com/til/3353/
7. • Do you sell mouthpieces for the Spirometer that are reusable or autoclavable?
   • We do not sell a reusable or autoclavable mouthpiece for any of our spirometers. However, A-M Systems does sell such a product. The part number...
   • https://www.vernier.com/til/3409/
8. • What are the dimensions of the disposable mouthpiece for the Spirometer?
   • The disposable mouthpiece for the Spirometer has an inside diameter of 32 mm (~1.26 inches) and an outside diameter of 34 mm (~1.34 inches). It...
   • https://www.vernier.com/til/3061/
9. • Why are my tidal volumes higher than expected?
   • It is common for tidal volumes to be slightly elevated when using a spirometer in the classroom. Any subject with a foreign object in their...
   • https://www.vernier.com/til/4472/
10. • The volume measurements from my spirometer drift up or down. How do I correct for this to calculate lung volume parameters?
    • There are several ways that you can correct for baseline drift in volume when using our spirometers. The best method depends on what software and...
    • https://www.vernier.com/til/3505/