Did you mean "Digital Breadboard Adapter"

1. • Where can I find BTA and BTD connectors and sockets? – Technical ...
   • Dec 14, 2009 ... This cable is designed for use on a breadboard. 2. Options for obtaining a male digital (BTD) connector for use with digital input or output on ...
   • https://www.vernier.com/til/818
2. • Vernier Wired Sensor Pinouts – Technical Information Library
   • Jan 31, 2020 ... Sensor-Specific Pinouts. Motion Detector ⚊ Pin 1 = Echo Input, Pin 2 = Initiate Signal · Digital Protoboard Adapter (BTD-ELV) · Breadboard Cable ( ...
   • https://www.vernier.com/til/5457
3. • National Instruments LabVIEW Troubleshooting and FAQs ...
   • Use this adapter if you are connecting Vernier analog sensors (pH, Temperature, Anemometer, etc..) to a non-Vernier interface. *Digital Protoboard Adapter (BTD- ...
   • https://www.vernier.com/til/3340
4. • Vernier Breadboard Cables Troubleshooting and FAQs – Technical ...
   • Nov 25, 2014 ... One end of the cable is either a British Telecom Analog (BTA) plug or a British Telecom Digital (BTD) plug that connects to a Vernier interface.
   • https://www.vernier.com/til/3332
5. • Can I use National Instruments' NI ELVIS with Vernier sensors ...
   • Jan 11, 2018 ... ... Protoboard Adapter (BTA-ELV). To connect Vernier digital sensors to NI-ELVIS use the Digital Protoboard Adapter (BTD-ELV). National ...
   • https://www.vernier.com/til/4144
6. • Can I use Vernier LabQuest sensors with non-Vernier software or ...
   • May 15, 2020 ... You can connect our sensors to an Arduino with a Vernier Arduino Interface Shield or with a Protoboard Adapter (analog or digital). You can ...
   • https://www.vernier.com/til/1952
7. • Can I use the DCU with the CBL 2 or LabPro?
   • YES. The CBL 2 and LabPro interfaces do support digital output and can be used with the . You can download sample Texas Instruments calculator...
   • https://www.vernier.com/til/627/
8. • How can I update to new Vernier equipment and still make use of my old Vernier equipment?
   • Below you will find a list of things to consider when upgrading your equipment. Each situation is different. If you need help figuring out which...
   • https://www.vernier.com/til/1961/
9. • Can I connect your digital microscopes and microscope imagers to a Chromebook?
   • Due to on-going changes in Chrome™, we cannot guarantee compatibility with Chromebook™ The following digital imagers and digital microscopes that Vernier sells have been used...
   • https://www.vernier.com/til/3287/
10. • Can I use older sensors with interfaces that have BTA and BTD ports?
    • In general, older sensors from ULIs and Serial Boxes can be used with new interfaces using an adapter. The newer style sensors have a feature...
    • https://www.vernier.com/til/661/
11. • Which digital video camera should I purchase for video analysis?
    • Consumer-grade electronics such as video cameras change very frequently. As a result it is difficult to recommend a specific make or model, because as soon...
    • https://www.vernier.com/til/1924/
12. • Can I use Go! devices with TI-84 Plus or TI-Nspire calculators or Easy devices with computers or Chromebooks?
    • Go! devices—Go!Temp, Go!Link and Go!Motion—are designed for use with computers and Chromebooks. As such they come with USB cables having standard-A connectors. Easy devices—EasyTemp, EasyLink...
    • https://www.vernier.com/til/1469/
13. • When I set up my Digital Control Unit, the Digital Out option is disabled. What should I do? (Logger Pro)
    • Using Logger Pro 3, the Digital Control Unit acts as a switch. The state of the switch is controlled by a value in time-based data...
    • https://www.vernier.com/til/2419/
14. • Digital sensor does not automatically identify when connected to LabQuest after using the DCU.
    • When using a Digital Control Unit (DCU) with LabQuest, automatic identification of sensors is disabled for the port used by the DCU. This is because...
    • https://www.vernier.com/til/3712/
15. • Can I use Vernier sensors with Pasco interfaces (or vice versa)?
    • Both Pasco and Vernier have made many different sensors and interfaces in the last 20 years, so there is no simple and quick answer to...
    • https://www.vernier.com/til/763/