Search
Cuvette Rack- How do I replace the plastic insert that holds the cuvettes in my older ...
- Apr 8, 2019 ... The order code for the replacement cuvette holder is CUV-HOLD. To remove the cuvette holder from your Colorimeter, use a flat head screwdriver ...
- https://www.vernier.com/til/2271
- Colorimeter Troubleshooting and FAQs – Technical Information ...
- Aug 6, 2018 ... Primary Test: Connect the Colorimeter to a Vernier Interface. Allow the Colorimeter to warm up for 5 minutes. Place a cuvette, about 3/4 full of ...
- https://www.vernier.com/til/1367
- How do I connect a fiber optic cable to an Ocean Optics spectrometer?
- Dec 30, 2013 ... 1) Separate the light source/cuvette holder from the detector. To do this, look at the “bottom” (not the underside) of the light source end ...
- https://www.vernier.com/til/1990
- Liquid has spilled inside my Colorimeter. What should I do ...
- Jun 5, 2017 ... However, other models do not have a replaceable cuvette holder and this may not even fix a corrosion issue. If the colorimeter is still under ...
- https://www.vernier.com/til/3039
- Go Direct Colorimeter Troubleshooting and FAQs – Technical ...
- Sep 7, 2017 ... (The green LED will flash to indicate the sensor is connected.) Primary Test: Allow the Colorimeter to warm up for 5 minutes. Place a cuvette, ...
- https://www.vernier.com/til/3853
- Can you use glass test tubes in the Go Direct SpectroVis Plus ...
- Jan 20, 2022 ... The cuvette holder for this spectrophotometer is 13.3 mm in diameter. So glass test tubes that are 13 mm in diameter should work in the ...
- https://www.vernier.com/til/4489
- How is the Go Direct SpectroVis Plus Spectrophotometer different ...
- Mar 20, 2017 ... This includes a flatter detector response in the emissions mode, a tighter cuvette holder, electronics to protect the lamp, as well as a lamp ...
- https://www.vernier.com/til/3919
- What is the difference between the Go Direct Visible ...
- Jan 18, 2022 ... The fiber optic (Vernier Spectrophotometer Optical Fiber (VSP-FIBER)) sits in the cuvette holder and is made out of plastic, so it is less ...
- https://www.vernier.com/til/14187
- Do Ocean Optics USB4000 (UV-VIS and VIS-NIR) Spectrometers ...
- Oct 18, 2010 ... b. If ONLY the detector part of the USB4000 SP-VIS is being used to measure emissions (with the cuvette holder/light source removed), the ...
- https://www.vernier.com/til/1898
- My Colorimeter is not working properly. What should I do ...
- Oct 25, 2017 ... ... cuvette holder is open. If the problem is still not fixed, see What should I do if I have a piece of hardware that needs to be repaired? for ...
- https://www.vernier.com/til/784
- Do you sell replacement lids for my plastic cuvettes?
- Yes, we do indeed sell replacement lids. These lids can be used with the cuvettes for the Colorimeter, SpectroVis, Vernier Spectrometer, and Ocean Optics spectrometers....
- https://www.vernier.com/til/1921/
- What types of liquids can be poured into your plastic Colorimeter or Spectrometer cuvettes without harming the cuvette?
- The cuvettes we sell for our Colorimeter and the SpectroVis Plus are made of polystyrene, which can be damaged by many different types of liquid...
- https://www.vernier.com/til/2520/
- What is the difference between the types of cuvettes you sell for Spectrometers and the Colorimeter?
- The two types of disposable cuvettes Vernier sells are Visible range (~350 nm to ~900 nm): polystyrene, 3+ mL capacity, 2 clear sides, 2 ribbed...
- https://www.vernier.com/til/2016/
- Do I need to use 4-sided clear cuvettes if I am doing a fluorescence experiment with the Spectro Vis Plus?
- You do not need to use 4-sided clear cuvettes to measure fluorescence with the SVIS-PL. A standard two-sided clear cuvette will work as long as...
- https://www.vernier.com/til/2202/
- Where can I get quartz cuvettes for your spectrophotometers?
- We sell Starna Quartz cuvettes. They are all heat-fused, using no adhesive: 1. Each cuvette is a standard rectangular cuvette. They are Far UV Quartz...
- https://www.vernier.com/til/1660/
- Where can I get replacement Turbidity bottles (cuvettes) or standards?
- We sell the that contains one empty glass turbidity bottle and one glass turbidity bottle filled with 100 NTU standard. For additional empty cuvettes, we...
- https://www.vernier.com/til/658/
- Can the turbidity cuvettes be autoclaved?
- According to Hach Co. the glass tubes used with a Vernier Turbidity Sensor can be autoclaved for sterilization purposes. However, the caps cannot. These turbidity...
- https://www.vernier.com/til/1025/
SAVE/SHARE YOUR CART