Specifications
- Temperature range: –25 to 125°C (–13 to 257°F)
- Maximum temperature that the sensor can tolerate without damage: 150°C
- Typical Resolution:
- 0.08°C (–25 to 0°C)
- 0.03°C (0 to 40°C)
- 0.1°C (40 to 100°C)
- 0.25°C (100 to 125°C)
- Temperature sensor: 20 kΩ NTC Thermistor
- Accuracy: ±0.2°C at 0°C, ±0.5°C at 100°C
- Response time (time for 90% change in reading)
- 50 seconds (in still air)
- 20 seconds (in moving air)
- Probe dimensions: Probe length (handle plus body) 15.5 cm
Important: For use in air and water only. For temperature measurements in harsher environments, we recommend the Stainless Steel Temperature Sensor.
Requirements
Choose a platform below to see its compatibility requirements.
LabQuest
Interface | LabQuest App |
---|
LabQuest 3 | Full support |
---|
LabQuest 2 (discontinued) | Full support |
---|
LabQuest (discontinued) | Full support |
---|
Computers
| Software |
---|
Interface | Graphical Analysis | Logger Pro | Logger Lite |
---|
LabQuest Mini | Full support | Full support | Full support |
---|
LabQuest 3 | Full support | Full support | Incompatible |
---|
LabQuest 2 (discontinued) | Full support | Full support | Full support |
---|
LabQuest Stream (discontinued) | Full support | Full support | Full support |
---|
Go!Link | Full support | Full support | Full support |
---|
LabQuest (discontinued) | Full support | Full support | Full support |
---|
LabPro (discontinued) | Incompatible | Full support | Full support |
---|
Compatibility Notes
Chromebook
iOS
| Software |
---|
Interface | Graphical Analysis | Graphical Analysis GW |
---|
LabQuest Stream (discontinued) | Full support | Full support |
---|
LabQuest 3 | Full support | Full support |
---|
LabQuest 2 (discontinued) | Full support | Full support |
---|
Compatibility Notes
Android
| Software |
---|
Interface | Graphical Analysis | Graphical Analysis GW |
---|
LabQuest Stream (discontinued) | Full support | Full support |
---|
LabQuest 3 | Full support | Full support |
---|
LabQuest 2 (discontinued) | Full support | Full support |
---|
Compatibility Notes
Arduino
LabVIEW
Texas Instruments
| Software |
---|
Interface | EasyData | DataMate | TI-84 SmartView | DataQuest | TI-Nspire Software |
---|
EasyLink | Full support | Incompatible | Full support | Full support | Full support |
---|
CBL 2 (discontinued) | Full support | Full support | Incompatible | Incompatible | Incompatible |
---|
LabPro (discontinued) | Full support | Full support | Incompatible | Incompatible | Incompatible |
---|
TI-Nspire Lab Cradle (discontinued) | Incompatible | Incompatible | Incompatible | Full support | Full support |
---|
Compatibility Notes