Experiencing Bluetooth® issues with Go Direct® sensors on Chromebooks? Get help here.

Original LabQuest Mini

Original LabQuest Mini

Original LabQuest Mini

This product has been discontinued.

This product has been replaced by LabQuest Mini (Model 2).

Category
Categories

The Original LabQuest Mini uses our award-winning LabQuest technology to educators collecting data with a Windows or Macintosh computer or Chromebook. LabQuest Mini works with Graphical Analysis or Logger Pro 3 software.

Key Features

  • 100 kHz maximum sampling rate gives you the unrivaled power of our LabQuest interface.
  • Five sensor ports give you the flexibility to choose from over 70 compatible sensors.

Specifications

  • Computer connection: USB 2.0 Full Speed
  • Maximum sampling rate: 100,000 samples per second
  • Analog inputs: 3
  • Digital inputs: 2
  • Power is supplied by the USB port of the computer—auxiliary AC power or batteries are not required

What's Included

Accessories

These accessories and replacement parts do not work with LabQuest Mini (Model 2)

AccessoryOrder CodePriceQuantity
Mini USB-C CableCB-USB-C-MINI$9.00
Replacement PartOrder CodePriceQuantity
Mini USB CableCB-USB-MINI$5.00

 

Software

Windows

macOS

Chromebook

Other Platforms

Compatible Sensors

Computers and Graphical Analysis (76 sensors)

Supported Sensors

Compatibility Notes

  1. Requires a Motion Detector Cable to connect to a DIG port on the interface
  2. Requires a BNC electrode
  3. Requires a Heart Rate Receiver to connect to an interface
  4. Connect this sensor via Bluetooth® for best results.
  5. The Data Tagging feature typically used with this sensor is not available in the free version of Graphical Analysis; Graphical Analysis Pro activation is required.
  6. Requires an additional signal source, such as LabQuest running the Power Amplifier app or a computer running the Power Amplifier Function Generator Software, to control the Power Amplifier output
  7. Software does not support baseline adjustment.
  8. Use with an electrode such as a pH Sensor, Conductivity Probe, or ORP Sensor.
  9. This interface/software combination can only collect force data; displacement measurements are not supported.
Computers and Logger Pro (81 sensors)

Supported Sensors

Compatibility Notes

  1. Requires a Motion Detector Cable to connect to a DIG port on the interface
  2. Requires a BNC electrode
  3. Requires a Heart Rate Receiver to connect to an interface
  4. Requires an additional signal source, such as LabQuest running the Power Amplifier app or a computer running the Power Amplifier Function Generator Software, to control the Power Amplifier output
  5. Sensor does not auto-ID; manual setup is required.
  6. Requires a Gas Pressure Sensor
  7. Use with an electrode such as a pH Sensor, Conductivity Probe, or ORP Sensor.
Computers and Logger Lite (69 sensors)

Supported Sensors

Compatibility Notes

  1. Requires a Motion Detector Cable to connect to a DIG port on the interface
  2. Requires a BNC electrode
  3. Requires a Heart Rate Receiver to connect to an interface
  4. Requires an additional signal source, such as LabQuest running the Power Amplifier app or a computer running the Power Amplifier Function Generator Software, to control the Power Amplifier output
  5. Requires a Gas Pressure Sensor
  6. Software does not support baseline adjustment.
  7. This interface/software combination auto IDs the VSMT Force sensor; displacement measurements require a Logger Lite file found at www.vernier.com/til/3621/
Chromebook and Graphical Analysis (76 sensors)

Supported Sensors

Compatibility Notes

  1. Requires a Motion Detector Cable to connect to a DIG port on the interface
  2. Requires a BNC electrode
  3. Requires a Heart Rate Receiver to connect to an interface
  4. Connect this sensor via Bluetooth® for best results.
  5. The Data Tagging feature typically used with this sensor is not available in the free version of Graphical Analysis; Graphical Analysis Pro activation is required.
  6. Requires an additional signal source, such as LabQuest running the Power Amplifier app or a computer running the Power Amplifier Function Generator Software, to control the Power Amplifier output
  7. Software does not support baseline adjustment.
  8. Use with an electrode such as a pH Sensor, Conductivity Probe, or ORP Sensor.
  9. This interface/software combination can only collect force data; displacement measurements are not supported.
NI LabVIEW (78 sensors)

Supported Sensors

Compatibility Notes

  1. Requires a Motion Detector Cable to connect to a DIG port on the interface
  2. Requires advanced programming for data collection
  3. Requires a Heart Rate Receiver to connect to an interface
  4. Requires an additional signal source, such as LabQuest running the Power Amplifier app or a computer running the Power Amplifier Function Generator Software, to control the Power Amplifier output
  5. Sensor does not auto-ID; manual setup is required.

Support

Warranty

5-year limited warranty
See our warranty policy

Replacement Parts

Contact Us

Educational use only: Vernier products are designed for educational use. They are not appropriate for industrial, medical, or commercial applications.

SAVE/SHARE YOUR CART