The Vernier Chloride Ion-Selective Electrode BNC Connector is a BNC-terminated electrode used to measure the concentration of chloride (Cl^–) ions in aqueous samples. Use with Vernier interfaces requires the Electrode Amplifier. Also compatible with Go Direct^® Electrode Aplifier and Go Direct^® Ion-Selective Electrode Amplifier.

Specifications

• Range (mV):
  • Electrode Amplifier: -450 mV to +1100 mV
  • Go Direct^® Electrode Amplifier: -1000 mV to +1000 mV
• Range (concentration): 1 to 35,000 mg/L (or ppm)
• Reproducibility (precision): ±30mV
• Interfering ions: CN^–, Br^–, I^–, S^2-, OH^–, NH₃
• pH range: 2–12 (no pH compensation)
• Temperature range: 0–80°C (no temperature compensation)
• Electrode slope: +56 ±3 mV/decade at 25°C
• Electrode resistance: 1 to 5 MΩ
• Minimum sample size: must be submerged 2.8 cm (1.1 in)

Requirements

The Chloride Ion-Selective Electrode BNC connects via BNC to one of our Electrode Amplifiers.

What's Included

• Chloride Ion-Selective Electrode with BNC terminated end, packed with a storage bottle
• 30 mL bottle of High Standard solution with SDS (100 mg/L Cl^–)
• 30 mL bottle of Low Standard solution with SDS (1 mg/L Cl^–)
• Short-Term ISE Soaking Bottle

Support