What's Included

Advanced Wind Experiment Kit

• Gear Set (8-, 16-, 32-, and 64-tooth gears) (1)
• Hex Locks (3)
• Spool (1)
• Wind Turbine Generator with Wires (1)
• High Torque Generator with Wires (1)
• Motor Mount Pack (2)
• Wind Turbine Hub (1)
• Power Output Board (1)
• Nacelle Body Half (2)
• Tower Base Leg (3)
• Tower Base Locking Ring (1)
• Tower Base Hub (1)
• Plastic Weightlifter Bucket (1)
• 250 ml Graduated Cylinder (1)
• Blade Pitch Protractor (1)
• 20″ Tower (1)
• 1/2″ Washer (25)
• Small Water Pump (1)
• 12″ x 1/4″ Clear Tubing (1)
• 8″ Hex Shaft with Hub Quick Connect (1)
• 1/4″ x 5″ Dowels* (25)
• Power Output Pack* (1)
• 3″ x 12″ x 3/32″ Balsa Wood Sheet* (5)
• 3″ x 12″ Chipboard Blade Sheet* (10)
• 4′ String* (1)

Classroom Pack

• Gear Set (8-, 16-, 32-, and 64-tooth gears) (3)
• Hex Locks (9)
• Spool (3)
• Wind Turbine Generator with Wires (3)
• High Torque Generator with Wires (3)
• Motor Mount Pack (4)
• Wind Turbine Hub (8)
• Power Output Board (1)
• Nacelle Body Half (6)
• Tower Base Leg (9)
• Tower Base Locking Ring (3)
• Tower Base Hub (3)
• Plastic Weightlifter Bucket (3)
• 250 ml Graduated Cylinder (1)
• Blade Pitch Protractor (3)
• 20″ Tower (3)
• 1/2″ Washer (75)
• Small Water Pump (1)
• 12″ x 1/4″ Clear Tubing (1)
• 8″ Hex Shaft with Hub Quick Connect (3)
• 1/4″ x 5″ Dowels* (150)
• Power Output Pack* (3)
• 3″ x 12″ x 3/32″ Balsa Wood Sheet* (25)
• 3″ x 12″ Chipboard Blade Sheet* (50)
• 4′ String* (3)
• 8 1/2″ x 11″ Chipboard Sheet* (25)

* This part is a consumable and is excluded from the warranty.

Note: The Advanced Wind Experiment Kit and Classroom Pack do not include basic tools (glue, scissors, screwdriver, etc.) or a multimeter. You can measure current and voltage from the turbines using a Go Direct^® Energy Sensor, and an optional Vernier Variable Load or Vernier Resistor Board.