Experiencing Bluetooth® issues with Go Direct® sensors on Chromebooks? Get help here.
Menu

Chloride Ion-Selective Electrode

Chloride Ion-Selective Electrode

Chloride Ion-Selective Electrode

$299.00

The Chloride Ion-Selective Electrode (ISE) is used to measure the concentration of Chloride (Cl–) in aqueous samples.

ORDER CODE: CL-BTA Categories ,
Education Levels

The concentration of the Chloride ion gives a quick measurement of salinity of water samples. Use the Chloride ISE to measure chloride levels in ocean saltwater or salt in food samples.

The Chloride ISE has a combination-style, non-refillable, gel-filled electrode. Unlike other ISEs available from Vernier, the Chloride ISE has a solid-state membrane that does not need to be replaced.

Important: Ion-Selective Electrodes require good chemical technique and careful calibration to obtain accurate results; they are not recommended for middle school or elementary students.

Ion Selective Electrodes - Tech Tips with Vernier
Ion Selective Electrodes - Tech Tips (4:25)

Specifications

  • Range (concentration): 1 to 35,000 mg/L (or ppm)
  • Reproducibility (precision): ±10% of full scale (calibrated 10 to 1000 mg/L)
  • Interfering ions: CN–, Br–, I–, OH–, S2–, NH3
  • pH range: 2–12 (no pH compensation)
  • Temperature range: 0–80°C (no temperature compensation)
  • Electrode slope: –56 ±3 mV/decade at 25°C
  • Electrode resistance: 1 to 5 MΩ
  • Immersion: 2.8 cm
  • Electrode length: 125 mm
  • Body diameter: 12 mm
  • Cable length: 100 cm

Experiments

Middle School (1 experiments)
ExperimentLab Book
Chloride and SalinityWater Quality with Vernier
High School (1 experiments)
ExperimentLab Book
Chloride and SalinityWater Quality with Vernier
College (1 experiments)
ExperimentLab Book
Chloride and SalinityWater Quality with Vernier

Requirements

Choose a platform below to see its compatibility requirements.

LabQuest
InterfaceLabQuest App
LabQuest 3Full support
LabQuest 2 (discontinued)Full support
LabQuest (discontinued)Full support
Computers
Software
InterfaceGraphical AnalysisLogger ProLogger Lite
LabQuest MiniFull supportFull supportFull support
LabQuest 3Full supportFull supportIncompatible
LabQuest 2 (discontinued)Full supportFull supportFull support
LabQuest Stream (discontinued)Full support 1Full supportFull support 1
Go!LinkFull supportFull supportFull support
LabQuest (discontinued)Full supportFull supportFull support
LabPro (discontinued)IncompatibleFull supportFull support

Compatibility Notes

  1. Connect LabQuest Stream via USB. Wireless connection is not supported.
Chromebook
Software
InterfaceGraphical Analysis
LabQuest MiniFull support
LabQuest 3Full support
LabQuest 2 (discontinued)Full support
LabQuest Stream (discontinued)Full support 1
Go!LinkFull support
LabQuest (discontinued)Full support

Compatibility Notes

  1. Connect LabQuest Stream via USB. Wireless connection is not supported.
iOS
Software
InterfaceGraphical AnalysisGraphical Analysis GW
LabQuest Stream (discontinued)Full supportFull support
LabQuest 3Full support 1Full support 1
LabQuest 2 (discontinued)Full support 1Full support 1

Compatibility Notes

  1. iOS and Androidâ„¢ devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing.
Android
Software
InterfaceGraphical AnalysisGraphical Analysis GW
LabQuest Stream (discontinued)Full supportIncompatible
LabQuest 3Full support 1Full support 1
LabQuest 2 (discontinued)Full support 1Full support 1

Compatibility Notes

  1. iOS and Androidâ„¢ devices can only connect to LabQuest 2 or LabQuest 3 via Wireless Data Sharing.
Arduino
Software
InterfaceArduino
Vernier Arduino® Interface ShieldFull support 1

Compatibility Notes

  1. Requires advanced programming for data collection
LabVIEW
Software
InterfaceNI LabVIEW
SensorDAQ (discontinued)Full support 1
Vernier myDAQ AdapterFull support 1 2
Go!LinkFull support 1
LabQuest MiniFull support
LabQuest Stream (discontinued)Full support
LabQuest 3Full support
LabQuest 2 (discontinued)Full support
LabQuest (discontinued)Full support

Compatibility Notes

  1. Requires advanced programming for data collection
  2. You can only read the raw count/raw voltage output by this sensor. You must do the programming to convert to proper sensor units.
Texas Instruments
Software
InterfaceEasyDataDataMateTI-84 SmartViewDataQuestTI-Nspire Software
EasyLinkFull support 1IncompatibleFull support 2Full supportFull support 2
CBL 2 (discontinued)Full support 3Full support 3 4IncompatibleIncompatibleIncompatible
LabPro (discontinued)Full support 3Full support 3 4IncompatibleIncompatibleIncompatible
TI-Nspire Lab Cradle (discontinued)IncompatibleIncompatibleIncompatibleFull supportFull support

Compatibility Notes

  1. Use with TI-84 Plus calculators only.
  2. Requires an Easy to Go! adapter
  3. CBL 2 and LabPro interfaces cannot be used with TI-84 Plus CE calculators.
  4. DataMate cannot be used with color screen TI-84 Plus calculators; use EasyData with these calculators.

What's Included

  • Vernier Chloride Ion-Selective Electrode
  • 30 mL bottle of Chloride Low Standard (10 mg/L)
  • 30 mL bottle of Chloride High Standard (1000 mg/L)
  • Short-term ISE soaking bottle
  • Polishing Strips

Accessories

AccessoryOrder CodePriceQuantity
Electrode SupportESUP$10.00
Replacement PartOrder CodePriceQuantity
Standard Cl ISE Solution - High ConcentrationCL-HST$25.00
Standard Cl ISE Solution - Low ConcentrationCL-LST$25.00
Electrode Storage BottlesBTL-ES$15.00

Support

Resources

Warranty

5-year limited warranty (consumables excluded)
See our warranty policy

Replacement Parts

Contact Us

Educational use only: Vernier products are designed for educational use. They are not appropriate for industrial, medical, or commercial applications.

SAVE/SHARE YOUR CART