Yes, it is possible to use a Vernier Ion-Selective Electrode (ISE) with an Arduino microcontroller. However, we do not recommend this combination unless you are......
Since we started this company in the early 1980’s, we have always tried to provide a way for teachers and students to “do their own......
Yes, we have created an Arduino library (named GDXLib) that allows Go Direct sensors to work with certain Arduino microcontrollers. The GDXLib library supports communication......
Vernier has created Arduino libraries that support both Go Direct sensors and LabQuest sensors. These libraries have been officially added to the Arduino Library Manager.......
The nominal dimensions of the are 6.7 mm x 2.7 mm x 1.7 mm. It has a mass of ~28 g....
Original LabQuest sensors – temperature, microphoneLabQuest 2 sensors – GPS, microphone, 3-axis accelerometers, light, and temperatureLabQuest 3 sensors – GPS, microphone For LabQuest 2 and......
If you are running a remote data logging experiment with multiple Go Direct devices, and you want all of the sensor data in one Graphical......
Once a remote data logging experiment has been started, there is no option to view data that are being stored on the Go Direct device.......
Some Go Direct devices, such as , have sensor channels that might be beneficial to zero for a remote data logging experiment. When configuring a......
The two options for starting a remote data logging experiment are Manually and On a Triggering Event. When On a Triggering Event is selected, the......